WCmore's SimulatedSwitches

From webCoRE Wiki - Web-enabled Community's own Rule Engine
Revision as of 01:06, 6 June 2019 by WCmore (talk | contribs) (Created page with "== Simulated Switches == thumb|right Simulated Switches are an imaginary device, that can be real useful to achieve things not normally possibl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Share on FacebookShare on TwitterShare on Google+Share on LinkedInShare on DiggShare on deliciousShare on redditShare on StumbleUpon

Simulated Switches

SimSwitchCreation.jpg

Simulated Switches are an imaginary device, that can be real useful to achieve things not normally possible with SmartHomes. They are free to create, and have many uses in advanced programming.

I often hear people talk about "Virtual Switches" and "Simulated Switches" interchangeably, but it's important to note that they use different Device Handlers, so they are definitely not the same. Personally, I will only recommend using "Simulated Switches", since I have seen a lot of issues involving virtual switches.

To create a SimSwitch, we can use a web browser to:

  • Log into SmartThing's IDE
  • Choose “My Devices” at the top
  • Click on “+ New Device” in the top right

Then use the image on the right as a guide -->

Side Note: Sometimes I have to use an "Incognito" or "Private Browsing Window" to be able to save the new device.

Once the device is added, ST will see it within a few seconds, but you will also have to add the device to webCoRE.



WCmore's Tips - Table of Contents











.