Difference between revisions of "WCmore's Tips"

From webCoRE Wiki - Web-enabled Community's own Rule Engine
Jump to: navigation, search
m (Handy Links for Reference)
m
Line 35: Line 35:
 
* You can now use this device in webCoRE.  If you still do not see it, try a hard refresh to your [https://dashboard.webcore.co/ Dashboard].  (''Ctrl-F5'')
 
* You can now use this device in webCoRE.  If you still do not see it, try a hard refresh to your [https://dashboard.webcore.co/ Dashboard].  (''Ctrl-F5'')
  
 +
----
 
=== New Section ===
 
=== New Section ===
  
 
More stuff coming soon...
 
More stuff coming soon...
  
 +
----
 
=== Handy Links for Reference ===
 
=== Handy Links for Reference ===
 
Here are a few links that I have found to be helpful
 
Here are a few links that I have found to be helpful

Revision as of 23:46, 21 March 2019

Hello and welcome!!

This is a collection of things that I have learned over the years. Stay tuned for more Tips & Tricks...

Simulated Switches

SimSwitchCreation.jpg

I often hear people talk about "Virtual Switches" as well as "Simulated Switches", but they are not the same. Personally, I will only recommend using "Simulated Switches", since I have seen a lot of errors involving virtual switches.

To create a SimSwitch, we can use a web browser to:

  • Log into SmartThing's IDE
  • Choose “My Devices” at the top
  • Click on “+ New Device” in the top right

Then use the image on the left as a guide:

Side Note: Sometimes I have to use an "Incognito" or "Private Browsing Window" to be able to log into the IDE.

Once the device is added, ST will see it within a few seconds, but you will also have to add the device to webCoRE.




Adding devices to webCoRE

  • Connect the device to SmartThings first
  • Test the device using the SmartThings app on your phone to make sure the new device is working thru the hub
  • Add the device to webCoRE by going to: Automation > SmartApps > webCoRE > Settings > Available devices > Available devices
  • Select a category, and place a check-mark next to any device that you want webCoRE to see and/or control
  • Save multiple times until you are back in the SmartApps page
  • You can now use this device in webCoRE. If you still do not see it, try a hard refresh to your Dashboard. (Ctrl-F5)

New Section

More stuff coming soon...


Handy Links for Reference

Here are a few links that I have found to be helpful

webCoRE & SmartThings

Other Resources

Advanced Pistons