Difference between revisions of "WCmore's Tips"
From webCoRE Wiki - Web-enabled Community's own Rule Engine
m (→Handy Links for Reference) |
m (→Handy Links for Reference) |
||
| Line 39: | Line 39: | ||
=== Handy Links for Reference === | === Handy Links for Reference === | ||
| + | * [https://dashboard.webcore.co/ Dashboard] (where we create our pistons) | ||
* [[Functions|webCoRE Functions]] | * [[Functions|webCoRE Functions]] | ||
* [[Expressions|webCoRE Expressions]] | * [[Expressions|webCoRE Expressions]] | ||
* [[TWC_Weather|$twc.weather]] (which replaces [[Weather|$weather]]) | * [[TWC_Weather|$twc.weather]] (which replaces [[Weather|$weather]]) | ||
| + | * [https://hotemoji.com/copy-paste.html Emoji reference] (can be inserted in pistons in notifications, piston states etc) | ||
Revision as of 00:23, 20 March 2019
Hello and welcome!!
This is a collection of things that I have learned over the years. Stay tuned for more Tips & Tricks...
Simulated Switches
I often hear people talk about "Virtual Switches" as well as "Simulated Switches", but they are not the same. Personally, I will only recommend using "Simulated Switches", since I have seen a lot of errors lately involving virtual switches.
To create a SimSwitch, we can use a web browser to:
- Log into the IDE
- Choose “My Devices” at the top
- Click on “+ New Device” in the top right
Then use the image on the left as a guide:
Side Note: Sometimes I have to use an "Incognito" or "Private Browsing Window" to be able to log into the IDE.
Once the device is added, ST will see it within a few seconds, but you will also have to add the device to webCoRE.
---
Adding devices to webCoRE
- Connect the device to SmartThings first
- Test the device using the SmartThings app on your phone to make sure the new device is working thru the hub
- Add the device to webCoRE by going to: Automation > SmartApps > webCoRE > Settings > Available devices > Available devices
- Select a category, and place a check-mark next to any device that you want webCoRE to see and/or control
- Save multiple times until you are back in the SmartApps page
- You can now use this device in webCoRE. If you still do not see it, try a hard refresh to your Dashboard. (Ctrl-F5)
New Section
Handy Links for Reference
- Dashboard (where we create our pistons)
- webCoRE Functions
- webCoRE Expressions
- $twc.weather (which replaces $weather)
- Emoji reference (can be inserted in pistons in notifications, piston states etc)
