WCmore's Tips

From webCoRE Wiki - Web-enabled Community's own Rule Engine
Revision as of 00:19, 20 March 2019 by WCmore (talk | contribs) (Handy Links for Reference)
Jump to: navigation, search
Share on FacebookShare on TwitterShare on Google+Share on LinkedInShare on DiggShare on deliciousShare on redditShare on StumbleUpon

Hello and welcome!!

This is a collection of things that I have learned over the years. Stay tuned for more Tips & Tricks...

Simulated Switches

SimSwitchCreation.jpg

I often hear people talk about "Virtual Switches" as well as "Simulated Switches", but they are not the same. Personally, I will only recommend using "Simulated Switches", since I have seen a lot of errors lately involving virtual switches.

To create a SimSwitch, we can use a web browser to:

  • Log into the IDE
  • Choose “My Devices” at the top
  • Click on “+ New Device” in the top right

Then use the image on the left as a guide:

Side Note: Sometimes I have to use an "Incognito" or "Private Browsing Window" to be able to log into the IDE.

Once the device is added, ST will see it within a few seconds, but you will also have to add the device to webCoRE.

---


Adding devices to webCoRE

  • Connect the device to SmartThings first
  • Test the device using the SmartThings app on your phone to make sure the new device is working thru the hub
  • Add the device to webCoRE by going to: Automation > SmartApps > webCoRE > Settings > Available devices > Available devices
  • Select a category, and place a check-mark next to any device that you want webCoRE to see and/or control
  • Save multiple times until you are back in the SmartApps page
  • You can now use this device in webCoRE. If you still do not see it, try a hard refresh to your Dashboard. (Ctrl-F5)

New Section

Handy Links for Reference

webCoRE Functions webCoRE Expressions $twc.weather which replaces $weather